Why Propane Not Flowing to Grill – Issue Solved

There are a few reasons that might cause why propane not flowing to grill. I have mentioned the checklist, check all the things and you will find which part of your grill is causing the propane not to flow to the grill. By checking all the key points and applying our methods, if you can’t find the problem, then you might need to call a professional.

Propane Not Flowing to Grill

Check Gas in the Tank 

Make sure that your regulator is turned on. If it is, then check the tank to see if there is enough propane in it. If there is gas in the tank, then the problem might be with the hose or the connection between the hose and the grill. Usually, the gas cylinder is 34 pounds when it is full and nearly 17 to 18 pounds when it is empty. You can use a normal weight scale to measure it. You may also read this post.

Check if Propane Hose not Working  

Another thing that may cause a problem is the hose. Check to see if the hose is kinked or damaged in any way. If it is, then you’ll need to replace it.

If the hose isn’t the problem, then the problem might be with the connection between the hose and the grill. There should be no leakage and the connection should be tight.

propane regulator not letting gas through

Reset the Regulator

If you’ve checked all of the above and there is still no Propane flowing to your grill, then you might need to reset the regulator. Quite possible propane regulator not letting gas through.

Reset the Regulator

To do this, turn off the control knobs and then disconnect the hose from the grill. Wait for a few minutes and then reconnect the hose to the grill. Turn on the gas valve slowly and then light up the grill to see if Propane is flowing to the grill.

If you open the gas valve too fast, the hose between the tank and grill was empty earlier. The gas will flow freely and the protection device will detect this free flow of gas and it will stop the propane.

If you still feel that the flames are not good but low, repeat the process up to three times. If you still don’t find perfect flames, it means you will need to change the regulator.

Leave a Reply

Your email address will not be published. Required fields are marked *